Medicube Mini Booster Pro Plus: Heads, Modes and Safe Use

Medicube Mini Booster Pro Plus is a compact skincare device that can work with compatible cleansing and face-roller heads. The useful buying question is which functions you will use, and which components are actually included in the selected set. A picture showing three heads does not establish that every listing contains all three.

This guide concerns the Mini Booster Pro Plus specifically. It is not a set of instructions for the older Mini Booster Pro, the full-size Booster Pro or the Booster Pro X2. Names that look similar can belong to different devices and manuals.

Read the box as three separate jobs

Choose the device or bundle by its written contents, rather than by a promotional layout. Accessories made for Mini Plus should not be assumed to fit the original Mini. If you only want the base, you can evaluate that purchase without also committing to every attachment or a complete new skincare range.

Getting familiar with the base

Medicube’s Singapore guide describes holding the button for about two to three seconds to power on, a short press to adjust intensity and a double press to change modes. It provides five intensity levels and recommends starting at level one. The guide describes five-minute mode sessions; that does not mean a beginner should repeatedly run every mode to reach a target total.

The regional guide explicitly describes the LED colours as indicators. Do not choose this product expecting the coloured indicator to provide the same service as a dedicated medical light treatment. Mode names and regional descriptions can vary, so keep the manual supplied with your specific device as the operating reference.

Try the controls before planning an elaborate routine. Start with familiar, suitable hydrating skincare and a short comfortable session according to the manual. Pressure and discomfort are not useful measures of whether you used the device well.

The attachments change the routine

Cleansing head: use the attachment’s cleansing instructions, rather than applying the base’s leave-on skincare method to a foaming wash. Check which cleanser textures the head permits, avoid abrasive scrub particles and keep the contact gentle. The goal is comfortable cleansing, not repeated scrubbing over the same pore.

Face roller: the official roller guide calls for applying enough gel before use and recommends the dedicated PDRN Booster Gel. Assemble it with the device switched off. Its modes and application areas belong to the roller guide, not to the base’s colour chart. Do not use the powered roller around the eyes, on wounds or over surgical sites.

If you have an implanted medical or metal device, review the model’s contraindications and obtain the relevant clinician’s advice before an electrical-device session. A general skincare serum being suitable for you does not answer a device-compatibility question.

Keep the first session simple

First confirm the model and attachment. Next check the allowed skincare medium, area, mode and level. Then use a familiar formula without adding a new acid, retinoid or spicule treatment on the same first trial. This makes it easier to identify what your skin finds comfortable.

Clean the relevant head as instructed after use and let it dry before storage. Do not assume that an attachment, charging port and entire base all have the same water resistance. Check the included charging accessories and electrical specifications in the actual listing before purchasing an adapter.

A device is an optional extra to a routine that already cleanses, moisturizes and protects from the sun. Search the Mini Booster Pro Plus listings for current set contents, and compare them with the manufacturer’s model-specific guides below.